Carbine CEL2 Standalone Leverset SL8 3in1

Carbine CEL2 Standalone Leverset SL8 Overview & Applications

Cheap hardware copies often bind against the strike plate or loosen at the mounting screws within months of installation. Fitting a genuine Carbine CEL2 Standalone Leverset SL8 across residential homes, commercial offices, and strata fire doors (35mm to 51mm thick) requiring app-free touchscreen PIN and RFID lever access gives installers accurate Australian backset geometry, solid fixing points, and smooth daily operation. App-free 2nd-generation upgrade over the 50-user CEL-3IN1-SL8, doubling capacity to 100 combined credentials and up to 2-hour fire rating (-/120/30).

Pair this item with matching hardware in our Digital Door Locks & Electronic Keypads range or check our AS 1905.1 Fire-Rated Door Locks & Hardware Hub. On commercial, strata, or rental upgrades, always follow the National Construction Code (NCC) AS 1905.1 Fire & AS 1428.1 Accessibility Standards.

Door Prep & Fitment: CEL2-3IN1-SL8 Keyless Entry Setup

Before ordering replacement hardware, run a tape measure over your existing cutout. When checking CEL2-3IN1-SL8 keyless entry setup on site, the CEL2-3IN1-SL8 retrofits standard 54mm circular cross-bore holes with an adjustable 60mm to 70mm deadlatch backset and AS 1428.1 compliant 65mm SL8 lever. Matching your existing hole centres and backset lets you swap worn parts cleanly without patching timber.

3-Step Fitting Guide: 13.56MHz Mifare RFID Fobs and Cards

Follow these three practical steps for 13.56MHz Mifare RFID fobs and cards so the mechanism lines up cleanly on the first pass:

1. Confirm your door has a 54mm circular face bore, 60mm or 70mm backset, 35mm to 51mm slab thickness, and >= 65mm screen door clearance.
2. Mount the adjustable 60mm-70mm deadlatch (including intumescent fire gaskets when installing the -FRKIT on certified fire doors).
3. Fit 4 x AA alkaline batteries and program up to 100 PIN codes and 13.56MHz MIFARE RFID cards/fobs directly on the touchscreen.

Build Quality & Standards: C4 Mechanical Key Override Barrel

Lightweight variety-store hardware quickly suffers from handle sag, surface pitting, or sticky latches under Australian sun and coastal air. The genuine CEL2-3IN1-SL8 features an ANSI Grade 2 certified, IP54 weather-resistant body with optional 2-hour AS 1905.1 fire-rated kit (-FRKIT), powered by 4 x AA alkaline batteries. Engineered around C4 mechanical key override barrel, every internal spring and load-bearing surface is built to handle heavy daily foot traffic.

C4 Keying Options & Melbourne Warehouse Dispatch

For single-key convenience across your property, the CEL2-3IN1-SL8 provides 3-in-1 standalone access storing up to 100 combined User PINs and 13.56MHz MIFARE RFID cards/fobs, 4 single-use codes, and a rekeyable 6-pin PD C4 key override. If you are ordering multiple compatible C4 cylinder locks and want them all pinned to one shared key before shipping, simply add our in-house Custom Keyed Alike Service (SKU: KA) to your cart.

Orders ship from our Melbourne, Victoria warehouse within 24 to 48 hours Australia-wide (free shipping over $149.95 AUD). Browse our Complete Hardware Catalogue or call (03) 9306 6760 or 0421 149 760.